Categories

System glitches and false alarms can be frustrating, and more importantly, may prevent your home security system from working how it should. Fortunately, most issues, from false alarms to dead batteries, are easy to fix. Check out our tips for troubleshooting your home alarm system in Bend. We’ll help you keep your family members safeguarded and your system operating properly.

Test Your Home Security System In Bend

One of the most sensible ways to troubleshoot your property’s security is to test it yourself! The latest systems let you place them in test mode to prevent you from initiating an emergency call. Once you’re in test mode, follow these steps:

• Arm your system as you normally would when leaving.
• Open a window or door that uses a contact sensor, or test other equipment. Close the window or door once you’re done so it doesn’t trip the alarm when you reactivate the system.
• Let the alarm go off for 60 seconds to ensure communications with the security provider and to create an entry in the alarm system log.
• Proceed to test sensors as you wish
• Check the systems’s activity log to verify functionality.

Don’t worry, monitoring professionals can tell that your system is involved in a test. Be sure to switch off test mode when you’re done. It’s smart to test once a month or whenever you adjust your home’s phone or internet provider.

Evaluate The Position And State Of Motion Detectors

Although an crucial part of your alarm system, motion sensors are notorious for false alarms. You can help prevent them with some simple troubleshooting.

• Do a physical inspection. Are there things that could shift within the detection path of the sensor, like a window treatment caught in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can result in malfunctions. Ensure the device is clean.
• Does the motion detector come with pet immunity you can activate? Some sensors can be set to disregard pets weighing as much as 100 pounds.
• When was the battery last replaced? A low battery can impact performance or result in false alarms.
• Is the sensor facing a heat source? Excessive heat from direct sun or a fireplace can cause an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Notifications

One helpful perk of the latest home security systems is that they’ll let you know when batteries are running low. If your system has a smartphone app or control panel, you’ll often see notifications there. Depending on your system, you could detect an occasional beep when batteries are low. 

Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that will have to be replaced every so often. It’s a good idea to keep batteries on hand and set a replacement schedule. Some systems also include a rechargeable backup battery for the central control panel. This battery keeps your system running if your power goes out and should charge back up once power is back online. If it fails to recharge, you will have to replace it.

Troubleshooting Is Effortless With ADT Home Security In Bend 

As the foremost name in home security, ADT creates systems that supply unsurpassed protection and functionality. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always be sent alerts when a battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Bend home. Place a call to (541) 213-2340 or fill out our form today!